SlimFit › fit in › Mazda CX-5
Will the Graco SlimFit fit in a 2017–2024 Mazda CX-5?
The SlimFit is about 18.5" wide; the CX-5's usable rear bench is about 49". It fits one rear position comfortably. Three across is tight (55.5" needed vs 49"). Note: rear legroom here is limited, so a rear-facing install may crowd the front passenger.
What fits this CX-5
- One seat, rear position: Yes. The SlimFit installs in an outboard rear position of a 2017–2024 Mazda CX-5, though you may slide the front seat forward for rear-facing.
- Three across: Tight — three need ~55.5" against only ~49". A narrower seat is the better bet.
- Modes this seat covers: rear-facing → forward-facing → booster.
- LATCH: lower anchors up to 47 lb; the CX-5 has 2 lower-anchor positions.
Common questions
Will the Graco SlimFit fit in a 2017–2024 Mazda CX-5?
Yes — the Graco SlimFit (18.5" wide) fits a single rear seating position in a 2017–2024 Mazda CX-5. Because this vehicle has limited rear legroom, a rear-facing install may require sliding the front seat forward. Three across is tight — its rear bench is about 49" and three of these would need 55.5".
Can you fit three SlimFits across a CX-5?
Probably not — three SlimFits need about 55.5" but the CX-5's usable bench is only about 49". Consider a narrower seat — see our narrowest-seats guide.
Sources: seat ratings & modes — NHTSA (pulled 2026-06-17); dimensions — manufacturer specs and owner measurements. Informational only — built from NHTSA public car-seat ratings and published seat/vehicle dimensions. This is not a safety certification and not a substitute for the seat and vehicle manuals. Always confirm the fit and install yourself before every trip.